NOTE: These Part #210-M relocation brackets are designed specifically for installation on a Moser Engineering Ford 9" or 12 bolt rear housing. They will NOT work on a stock rear or a Strange Engineering 12 bolt or Dana 60 rear housing, use Part #210-S for those applications.

NON-LOWERED vehicles will also see a dramatic increase in traction by lowering the rearward angle of the LCA with our relocation brackets. The lower mount holes are placed in the arc pattern of the OEM length LCA. Therefore allowing a non-lowered F-Body to drop the rear LCA angle and NOT require a longer than OEM LCA. All geometry is correctly maintained. The anti-squat performance is providing most users with a full .10 or better 60' reduction!

Brackets are Laser-Cut from 3/16" cold rolled steel using state-of-the-art CAD/CAM technology for precision tolerances. Must be welded into place. Hardware is included. Since the brackets must be welded in place, we ship them bare. Weld in LCA Relocation Brackets are the only SAFE and EFFECTIVE way to install them.

Note: For installation on stock rear, Strange Engineering 12 bolt or Dana 60 rear, and Currie Ford 9" or 12 bolt rear. If you have a Moser Engineering 12 bolt or Ford 9" rear, use our Part # 210-M relocation brackets.

Priced per Pair -- Qty. 1 = 1 Pair